ACX asks for 1 to 5 seconds of room tone at the start and end of every file, and never more than 5. Room tone is the sound of your room with nobody speaking. Use your room’s real sound, not generated silence, and aim for about 1.5 to 2 seconds at each end.
The number ACX allows
| ACX asks for | 1 to 5 s at each end |
|---|---|
| Never more than | 5 s |
| ChapterBooth sets | about 1.5 s before, 1.5 to 3 s after |
ACX’s words: “We recommend between 1 and 5 seconds of room tone at the beginning and end of each file” and “Room tone spacing must not exceed 5 seconds.”
How to measure it
The free ACX Check times the gap from the start of the file to your first word, and from your last word to the end. Under 1 second at the start is a warning, under half a second a fail; over 5 seconds at either end is a fail.
Why it happens
- Trimming right up to the first word, or cutting the last breath short.
- A long pause left at the start while you got ready.
- Silence generated by the editor, or a long fade into nothing.
Fix it in Audacity
- At the start of every session, record 30 seconds of your room with nobody speaking. Keep it in its own track.
- Too long: select from the start of the file to about 1.5 seconds before your first word (the selection toolbar shows the length) and delete it. Do the same at the end.
- Too short: copy 1.5 seconds of your recorded room tone and paste it at the start or the end. It must come from the same room and session, or the join is audible.
- Check the file again.
Fix it in ChapterBooth
ChapterBooth trims or extends both ends of every file for you: about 1.5 seconds before your first word and 1.5 to 3 seconds after the last. When an end is too short, it fills the gap with your own room’s sound, taken from the same recording. Drop a file on the ACX Check and press Fix it free to hear it.
What not to do
- Don’t use generated silence. Digital silence is not room tone, and a file that drops to nothing and back sounds broken.
- Don’t paste room tone from another day. Rooms change; the join can be heard.
- Don’t gate the noise to zero to pass the noise floor. You lose the room tone with it.
Every rule on one page: ACX requirements in plain English. Every rejection reason: why ACX rejects audiobooks.
Questions
What is room tone?
The sound of your recording space with nobody speaking: faint air, the room itself. Every room has one, and ACX wants it at both ends of each file.
Can I use Generate › Silence in Audacity?
No. That makes digital silence, which is not room tone. Copy a stretch of your own room’s quiet instead.
Is more than 5 seconds a problem?
Yes. ACX says room tone spacing must not exceed 5 seconds. A long gap before the first word reads as dead air.
Do the credits and the retail sample need room tone too?
ACX’s rule covers each file, so give every file you upload the same 1 to 5 seconds at both ends.
Sources
- ACX, “What are the ACX audio submission requirements?”, dated 15 April 2026: help.acx.com, read 12 November 2026.