Skip to content

Guide · 4 min read

ACX says your chapters don’t match

ACX wants the whole book consistent in sound: levels, tone, noise and spacing. A chapter that is louder, brighter or noisier than the next can be flagged even when every file passes alone. Bring every file to the same RMS, about −20 dB, and record every session the same way.

The number to aim for

ACX’s numbernone for consistency
Every file−23 to −18 dB RMS
Our rule of thumbwithin 1.5 dB of the book

ACX’s words: “Your audiobook should be consistent in sound and formatting.”

How to measure it

Drop every chapter on the free ACX Check at once. It lists each file’s RMS, peak and noise floor in one table, so a file that sits apart is easy to spot. Then listen to the last minute of one chapter and the first minute of the next.

Why it happens

  • Chapters recorded in different rooms, or the same room on a noisy day.
  • Sitting closer to the mic one day and further the next.
  • Different settings or effects on different chapters.
  • A tired voice at the end of a long session.

Fix it in Audacity

  1. Decide one chain for the whole book: Loudness Normalization on RMS at −20 dB, then a Limiter at −3.5 dB.
  2. Save it as a macro in Tools › Macro Manager. Under Apply Macro to, press Files and pick every chapter, so each one gets exactly the same treatment.
  3. Check the whole book again and compare the RMS column.
  4. For a chapter that still sounds different, record it again with the usual setup.

Fix it in ChapterBooth

ChapterBooth masters every chapter to the same target, −19.5 dB RMS, with the same cleanup. Before you download, the final check compares every file with the book’s middle value and flags any that sits more than 1.5 dB away.

What not to do

  • Don’t normalize peaks per file. Equal peaks don’t make equal loudness; set RMS instead.
  • Don’t process chapters with different presets. One chain for the book.
  • Don’t move the mic between sessions without marking where it was. A photo of the setup helps; see recording at home.

Every rule on one page: ACX requirements in plain English. Every rejection reason: why ACX rejects audiobooks.

Questions

How close do chapter levels need to be?

ACX gives no number. We keep every file within 1.5 dB RMS of the book’s middle value, which is our own rule of thumb, not ACX’s.

Every file passes on its own. Why was the book flagged?

ACX listens across the book. A chapter recorded in another room or at another distance can sound different even when its numbers pass.

Can EQ make two rooms sound the same?

A little. Small tone differences can be matched; a different room’s echo can’t be removed. Re‑record the odd chapter in the usual place.

Do pickups have to match?

Yes. A fixed line recorded weeks later must sit in the chapter without a jump. Use the same spot, mic, distance and settings.

Sources

  • ACX, “What are the ACX audio submission requirements?”, dated 15 April 2026: help.acx.com, read 12 November 2026.

Published 12 November 2026 · ACX rules checked on help.acx.com on 12 November 2026. ACX and Audible are trademarks of Audible, Inc. ChapterBooth is not affiliated with either.