ACX takes MP3 files at 192 kbps or higher, constant bit rate (CBR), at 44.1 kHz. Variable bit rate and 48 kHz files don’t meet the rule. In Audacity, export as MP3 with Bit Rate Mode set to Constant, Quality 192 kbps and Sample Rate 44100 Hz.
The settings ACX allows
| Format | MP3 |
|---|---|
| Bit rate | 192 kbps or higher |
| Bit rate mode | Constant (CBR) |
| Sample rate | 44.1 kHz |
| ChapterBooth exports | 192 kbps CBR, 44.1 kHz, mono |
ACX’s words: “Each file must be a 192 kbps or higher CBR, 44.1kHz MP3.”
How to measure it
The free ACX Check reads the sample rate, the bit rate and whether it is constant or variable straight from the file, in your browser. It also tells you when a file is compressed too far to repair.
Why it happens
- Audacity’s MP3 export defaults to Preset, which is variable.
- USB mics and interfaces that record at 48 kHz, exported without changing the rate.
- Phone apps that save M4A or low bit rate MP3, run through a converter.
Fix it in Audacity
- Open the original recording or your edited project, not an old MP3.
- Choose File › Export Audio and set Format to MP3.
- Set Channels to Mono and Sample Rate to 44100 Hz.
- Set Bit Rate Mode to Constant and Quality to 192 kbps. Export, then check the file.
Fix it in ChapterBooth
Every ChapterBooth export is a 192 kbps constant‑bit‑rate MP3 at 44.1 kHz, mono, named in plain letters and numbers. Upload any format you have (WAV, MP3, M4A) and the export is right without touching a setting. Paid books also get WAV masters to keep.
What not to do
- Don’t re‑encode a low bit rate MP3 up to 192. The file meets the number and still sounds compressed. Export from the original.
- Don’t leave Bit Rate Mode on Preset or Variable.
- Don’t mix formats across the book. Keep every file the same, channels included; see mono or stereo.
Every rule on one page: ACX requirements in plain English. Every rejection reason: why ACX rejects audiobooks.
Questions
Is 320 kbps all right?
Yes. ACX accepts 192 kbps or higher, and says 256 and 320 kbps are fine, though listeners will hear little difference.
Can I record at 48 kHz?
Yes. Record at whatever your mic or interface uses, and export the MP3 at 44.1 kHz. The rule is about the file you upload.
Why does ACX want constant bit rate?
ACX says constant bit rate keeps its pre‑sale encoding working without errors. Variable bit rate files can fail that step.
My file is 192 kbps but the check says VBR. Why?
Audacity’s default MP3 mode, Preset, varies the bit rate. Re‑export with Bit Rate Mode set to Constant.
Sources
- ACX, “What are the ACX audio submission requirements?”, dated 15 April 2026: help.acx.com, read 12 November 2026.